| DrumQuik PRO | | Pressure | Uncoupled:
Vacuum to 45 psig (3.1 bar) Coupled:
Vacuum to drum rating | | Temperature | Drum Insert:
-20°to 120°F (-29°to 49°C) | Coupler:
HDPE, 32° to 120°F (0° to 49°C) | | Materials | Drum insert & dip-tube:
Virgin polyethylene (HDPE) | Shipping plug:
Virgin polyethylene (HDPE), FKM | Valves:
Acetal | Coupler:
Virgin polypropylene | Spring (coupler only):
316 stainless steel, Hastelloy C, virgin PEEK UHP, PPS or Teflon encapsulated 316 stainless steel (TESS) | | Seals | | Coupler seals: EPDM, FKM, Simriz UHP FFKM Perfluoroelastomer
Bung seal: Polyolefin, EPDM, FKM
Shipping plug seal: EPDM, FKM | | Torque specifications | | 2" Buttress - 20ft-lbs (27 N m) BCS 56x4 - 20ft-lbs (27 N m) 2" NPS (plastic drum) - 20ft-lbs (27 N m)
2" NPS (steel drum) - 15ft-lbs (20 N m)
Shipping plug - hand tight | | | Note: The torque specifi cations listed above are general recommendations which may need to be adjusted + or – depending on specific application | | | | | | | | DrumQuik PUR | | Pressure | Uncoupled:
Vacuum to 45 psig (3.1 bar) Coupled:
Vacuum to drum rating | | Temperature | Drum Insert:
-20°to 120°F (-29°to 49°C) | Coupler:
PVDF, 0° to 120°F (-18° to 49°C) | | Materials | Drum insert & dip-tube:
Virgin polyethylene (HDPE) | Shipping plug:
Virgin polyethylene (HDPE), FKM | | Coupler:
PVDF | Spring (coupler only):
316 stainless steel, Hastelloy C, virgin PEEK UHP, PPS or Teflon encapsulated 316 stainless steel (TESS) | | Seals | | Coupler seals: EPDM, FKM, Simriz UHP FFKM Perfluoroelastomer
Bung seal: Polyolefin, EPDM, FKM
Shipping plug seal: EPDM, FKM | | Torque specifications | | 2" Buttress - 20ft-lbs (27 N m) BCS 56x4 - 20ft-lbs (27 N m) 2" NPS (plastic drum) - 20ft-lbs (27 N m)
2" NPS (steel drum) - 15ft-lbs (20 N m)
Shipping plug - hand tight | | | Note: The torque specifi cations listed above are general recommendations which may need to be adjusted + or – depending on specific application | | | | | | | | DrumQuik UDA | | Pressure | | Vacuum to 120 psig | | Temperature | | -32°to 120°F (0°to 49°C) | | Materials | Main Components:
Natural, virgin polypropylene (3-Port UDA uses FDA approved and animal free polypropylene) | O-rings:
UDA: none, 3-Port UDA: Foood grade EPDM (FKM optional) | Lubricants:
None used | Coupler:
Virgin polypropylene | Spring (coupler only):
316 stainless steel, Hastelloy C, virgin PEEK UHP, PPS or Teflon encapsulated 316 stainless steel (TESS) | | Number of ports | | UDA: none, 3-Port UDA: three; one 1/2" female NPT liquid port, one 1/4" female NPT vent port and one 3/8" NPT Recirculation Port | | Thread | | UDA: presses into HFC, NSH & ChemQuik Series 3/4" male NPT terminations , 3-Port: 3/4" male NPT | | Dip-tube length | | UDA: polypropylene 37" (889mm) or 55" (1397mm), 3-Port: HDPE, use standard DrumQuik PRO or PUR dip-tubes | | Torque specifications | | 2" Buttress - 20ft-lbs (27 N m) BCS 56x4 - 20ft-lbs (27 N m) 2" NPS (plastic drum) - 20ft-lbs (27 N m)
2" NPS (steel drum) - 15ft-lbs (20 N m)
Shipping plug - hand tight | | | Note: The torque specifi cations listed above are general recommendations which may need to be adjusted + or – depending on specific application | | | | | |